• GRECHO Fiberglass

What are the Typical Performance Benefits of FRTP?


Fiber Reinforced Thermoplastic Composites (FRTP


Fiber-reinforced thermoplastic composite materials are an important part of composite materials. Various thermoplastic resins are reinforced with glass fibers (GF), carbon fibers (CF), aramid fibers (AF) and other fiber materials. Advanced fiber-reinforced thermoplastic composites have excellent properties such as high toughness, corrosion resistance and fatigue resistance, simple molding process, short cycle, high material utilization rate (no waste), and no need for low-temperature storage, and have become a research hotspot in the materials industry.


Typical performance benefits of FRTP


Thermoplastic composite FRTP has been used for decades. Compared with thermosetting composites such as phenolic resin, urea-formaldehyde resin, epoxy resin, and polyurethane, thermoplastic composites have some special properties:


Low density and high strength: The density of FRTP is 1.1-1.6g/cm3, which is only 1/5-1/7 of steel, 1/3-1/4 lighter than thermosetting FRP, and can be obtained with a smaller unit mass Higher mechanical strength and application grade.


Large degree of freedom in performance design: The physical properties, chemical properties, and mechanical properties of FRTP are designed through the reasonable selection of raw material types, proportions, processing methods, fiber content and layup methods. There are many materials, the most important ones include polyetherketoneketone (PEKK), polyetheretherketone (PEEK), polyphenylene sulfide (PPS), nylon (PA), polyetherimide (PEI), etc. Therefore, its The degree of freedom in material selection and design is also much greater.


Thermal properties: The general use temperature of plastic is 50-100℃, and it can be increased to above 100℃ after being reinforced with glass fiber. The heat distortion temperature of PA6 is 65°C, and after reinforced with 30% glass fiber, the heat distortion temperature can be increased to 190°C. The heat resistance of PEEK reaches 220°C. After reinforced with 30% glass fiber, the operating temperature can be increased to 310°C. Thermosetting composite materials cannot achieve such high heat resistance.


Chemical corrosion resistance: It is mainly determined by the performance of the matrix material. There are many types of thermoplastic resins, and each resin has its own anti-corrosion characteristics. Therefore, the matrix resin can be selected according to the use environment and medium conditions of the composite material. Generally, can meet the requirements of use. The water resistance of FRTP is also better than that of thermosetting composites.


Electrical properties: FRTP generally has good dielectric properties, does not reflect radio waves, and transmits microwaves well. Since the water absorption rate of FRTP is smaller than that of thermosetting FRP, its electrical properties are better than the latter. After adding conductive material to FRTP, it can improve its conductivity and prevent the generation of static electricity.


Waste can be recycled: FRTP can be re-processed and formed, waste and leftovers can be recycled, and the physical and mechanical properties do not change significantly, and it will not cause environmental pollution. environmental requirements.


Check out our photo gallery and other news about GRECHO Fiberglass cases here.

Any glass fiber product or composite material purchase requirements can be contacted the following:

Whatsapp: +86 18677188374
Email: info@grechofiberglass.com
Tel: +86-0771-2567879
Mob.: +86-18677188374
Website: www.grechofiberglass.com

Post time: Sep-23-2021